Building for the training of the personnel responsible for rescue and recovery from confined spaces

  • ENI
  • Detail Engineering
  • Livorno
  • 2018

The purpose of this work is the development of detailed engineering for the construction of a structure used for the training of rescue personnel and training in recovery from confined spaces inside Livorno Refinery.
The works consist in the development of construction engineering for structures both in foundation and elevation. Processing of electrical engineering to power to support lighting.

Oil & Gas

Gallery

data-rellax-speed=
data-rellax-speed=
data-rellax-speed=

Similar projects

Go to Case Histories

/Oil & Gas
Evaluation of the residual life of reactors R – 2203 and R – 2501  
/Oil & Gas
Analysis and evaluation of the damages caused to the vessels V1405 – V 1404 – V 1402, the reactors R 201 – R 301 – R 302 – R 303 – R 304, columns C 101 N – C 501 – C 1402 – C 1403 – C 1404 – C 1405 by the CREEP  
/Oil & Gas
Detailed engineering for the analysis and evaluation of the damages caused to the reactors by the CREEP  
/Oil & Gas
Detailed engineering for the analysis and evaluation of the damages caused to the vessels by the CREEP  
/Oil & Gas
Reinforcement of the existing structure for the placement of the new V105 and V102 vessels  
/Oil & Gas
Installation of the skid for the oil separation of the condensations  
/Oil & Gas
Preliminary structural verification for fire proofing overloads  
/Oil & Gas
Collecting and removal plant of odorous substances emitted from fuel oil storage tanks  
/Oil & Gas
Detail engineering design of the unit 18 (HDS plant) damaged by the fire  
/Oil & Gas
Planning of 2015 shut down service of the Units HDC2 – SWS4 – DG4 – IGAS – H2 HDS2 – ZOLFO2 – DG2 – ROSE – DP2 – VACUUM – EST  
/Oil & Gas
Installation of a tank to collect washing waters coming from the “Centro Oli” Val d’Agri  
/Oil & Gas
Topographic and laser scanning surveys and three-dimensional graphic rendering of the as built of Taranto oil pier  
/Oil & Gas
Verification of the efficiency of the acid and hydrocarbons blow down network for three refinery units U-6100, U-6200, U-6700  
/Oil & Gas
Installation of No. 23 foam premixers on the factory firefighting system  
/Oil & Gas
Engineering services, in the frame of the EPC project “ASSIUT hydrocracking complex”  
/Oil & Gas
Piping engineering services for new BioDiesel plant at Rotterdam  
/Oil & Gas
Revamping of atmospheric and vacuum uninstalled sections and replacing column C101  
/Oil & Gas
Detailed engineering for basin water collection systems  
/Oil & Gas
Detailed engineering for the construction of the new CW24/14″ RC3 NAHY saturated gases 2  
/Oil & Gas
Study of the check of the failure of the foundations of new torch  
/Oil & Gas
Development of structures for the consolidation of the support of V1402  
/Oil & Gas
New Biodiesel formulation circuit  
/Oil & Gas
Collecting and removal plant of odorous substances emitted from bitumen storage tanks  
/Oil & Gas
Dismantling of tank loading arms at the oil pier of the Manfredonia plant  
/Oil & Gas
Firefighting system of pumps rooms SF-1 and SF-2  
/Oil & Gas
Change of intended use of the tank TK-24  
/Oil & Gas
Installation of new bitumen storage tank  
/Oil & Gas
Ingegneria di dettaglio per la progettazione di un nuovo serbatoio di stoccaggio Bitumi  
/Oil & Gas
Revamping of active and passive fire protection system to protect the butylene discharge platform  
/Oil & Gas
Replacement of column head E-1101 for metallurgic up-grade  
/Oil & Gas
Upgrading of the logistics system (storage, handling, refining, ship loading) of Tempa Rossa crude oil  
/Oil & Gas
Interventions in the WBS1 Taranto Contingency Plan activities, including detail engineering for the upgrading of the logistic (storage, handling and ships loading) of the bitumen  
/Oil & Gas
Re-building of reaction section and stripping of HDS2 unit  
/Oil & Gas
Installation of a new liquid ring compressor to serve the torch U-72  
/Oil & Gas
Detail Engineering adjustment furnace burners  
/Oil & Gas
Installation of n. 4 the new air coolers E-1419 Q/R/S/T – Contingency Plan Project  
/Oil & Gas
Structural verification of the column C-101  
/Oil & Gas
Analysis of the logistic operations within the “Contingency Plan Taranto” project, in order to identify critical issues and any interferences  
/Oil & Gas
Design for TAF unit interconnecting to Refinery  
/Oil & Gas
Stress analysis on all lines of the EST unit  
/Oil & Gas
Verification of safety systems of the VACUUM unit heat exchangers  
/Oil & Gas
Process engineering for the Installation of a slurry FCC filtration package  
/Oil & Gas
Pitch as burner fuel from Sannazzaro East Plant to Le Teil Cement Plant  
/Oil & Gas
Soluzione di impianti per il trasporto del pitch (residuo della lavorazione dell’impianto EST) come combustile per forni da Sannazzaro ai cementifici di Le Teil  
/Oil & Gas
Process study to restore pitch circuit operativity  
/Oil & Gas
Installation of the air coolers C-90157 A/B  
/Oil & Gas
As built surveys of the main and secondary pipe trenches by laser scanner  
/Oil & Gas
Installation of containment basin for tanks containing oily waters  
/Oil & Gas
Multidisciplnary Engineer for the project Midor Refinery Expansion  
/Oil & Gas
Basic and detail Engineering project to complete the construction of a new underground storage system of LPG at STIR depot in Bizerte -Tunisia  
/Oil & Gas
Ingegneria di Base e di Dettaglio per il progetto di completamento della costruzione di un nuovo sistema di stoccaggio interrato di GPL c/o il deposito STIR di Bizerte  
Entrust your project to our team of high qualified professionals
Contact Us