Topographic and laser scanning surveys and three-dimensional graphic rendering of the as built of Taranto oil pier

  • ENI
  • Detail Engineering
  • Taranto
  • 2013

In order to be able to carry out the detailed study of the layout changes of the pipelines on the Petroli Pier in Taranto, a laser scanner survey campaign has been developed. The surveys have made it possible to obtain a three-dimensional model of the pier with all its structures and lines installed, such as to be the starting point for the plant modifications that will be designed.

Oil & Gas

Gallery

data-rellax-speed=
data-rellax-speed=
data-rellax-speed=

Similar projects

Go to Case Histories

/Oil & Gas
Evaluation of the residual life of reactors R – 2203 and R – 2501  
/Oil & Gas
Analysis and evaluation of the damages caused to the vessels V1405 – V 1404 – V 1402, the reactors R 201 – R 301 – R 302 – R 303 – R 304, columns C 101 N – C 501 – C 1402 – C 1403 – C 1404 – C 1405 by the CREEP  
/Oil & Gas
Detailed engineering for the analysis and evaluation of the damages caused to the reactors by the CREEP  
/Oil & Gas
Detailed engineering for the analysis and evaluation of the damages caused to the vessels by the CREEP  
/Oil & Gas
Reinforcement of the existing structure for the placement of the new V105 and V102 vessels  
/Oil & Gas
Installation of the skid for the oil separation of the condensations  
/Oil & Gas
Preliminary structural verification for fire proofing overloads  
/Oil & Gas
Collecting and removal plant of odorous substances emitted from fuel oil storage tanks  
/Oil & Gas
Detail engineering design of the unit 18 (HDS plant) damaged by the fire  
/Oil & Gas
Planning of 2015 shut down service of the Units HDC2 – SWS4 – DG4 – IGAS – H2 HDS2 – ZOLFO2 – DG2 – ROSE – DP2 – VACUUM – EST  
/Oil & Gas
Installation of a tank to collect washing waters coming from the “Centro Oli” Val d’Agri  
/Oil & Gas
Verification of the efficiency of the acid and hydrocarbons blow down network for three refinery units U-6100, U-6200, U-6700  
/Oil & Gas
Installation of No. 23 foam premixers on the factory firefighting system  
/Oil & Gas
Engineering services, in the frame of the EPC project “ASSIUT hydrocracking complex”  
/Oil & Gas
Piping engineering services for new BioDiesel plant at Rotterdam  
/Oil & Gas
Revamping of atmospheric and vacuum uninstalled sections and replacing column C101  
/Oil & Gas
Detailed engineering for basin water collection systems  
/Oil & Gas
Detailed engineering for the construction of the new CW24/14″ RC3 NAHY saturated gases 2  
/Oil & Gas
Study of the check of the failure of the foundations of new torch  
/Oil & Gas
Development of structures for the consolidation of the support of V1402  
/Oil & Gas
New Biodiesel formulation circuit  
/Oil & Gas
Collecting and removal plant of odorous substances emitted from bitumen storage tanks  
/Oil & Gas
Dismantling of tank loading arms at the oil pier of the Manfredonia plant  
/Oil & Gas
Firefighting system of pumps rooms SF-1 and SF-2  
/Oil & Gas
Building for the training of the personnel responsible for rescue and recovery from confined spaces  
/Oil & Gas
Change of intended use of the tank TK-24  
/Oil & Gas
Installation of new bitumen storage tank  
/Oil & Gas
Ingegneria di dettaglio per la progettazione di un nuovo serbatoio di stoccaggio Bitumi  
/Oil & Gas
Revamping of active and passive fire protection system to protect the butylene discharge platform  
/Oil & Gas
Replacement of column head E-1101 for metallurgic up-grade  
/Oil & Gas
Upgrading of the logistics system (storage, handling, refining, ship loading) of Tempa Rossa crude oil  
/Oil & Gas
Interventions in the WBS1 Taranto Contingency Plan activities, including detail engineering for the upgrading of the logistic (storage, handling and ships loading) of the bitumen  
/Oil & Gas
Re-building of reaction section and stripping of HDS2 unit  
/Oil & Gas
Installation of a new liquid ring compressor to serve the torch U-72  
/Oil & Gas
Detail Engineering adjustment furnace burners  
/Oil & Gas
Installation of n. 4 the new air coolers E-1419 Q/R/S/T – Contingency Plan Project  
/Oil & Gas
Structural verification of the column C-101  
/Oil & Gas
Analysis of the logistic operations within the “Contingency Plan Taranto” project, in order to identify critical issues and any interferences  
/Oil & Gas
Design for TAF unit interconnecting to Refinery  
/Oil & Gas
Stress analysis on all lines of the EST unit  
/Oil & Gas
Verification of safety systems of the VACUUM unit heat exchangers  
/Oil & Gas
Process engineering for the Installation of a slurry FCC filtration package  
/Oil & Gas
Pitch as burner fuel from Sannazzaro East Plant to Le Teil Cement Plant  
/Oil & Gas
Soluzione di impianti per il trasporto del pitch (residuo della lavorazione dell’impianto EST) come combustile per forni da Sannazzaro ai cementifici di Le Teil  
/Oil & Gas
Process study to restore pitch circuit operativity  
/Oil & Gas
Installation of the air coolers C-90157 A/B  
/Oil & Gas
As built surveys of the main and secondary pipe trenches by laser scanner  
/Oil & Gas
Installation of containment basin for tanks containing oily waters  
/Oil & Gas
Multidisciplnary Engineer for the project Midor Refinery Expansion  
/Oil & Gas
Basic and detail Engineering project to complete the construction of a new underground storage system of LPG at STIR depot in Bizerte -Tunisia  
/Oil & Gas
Ingegneria di Base e di Dettaglio per il progetto di completamento della costruzione di un nuovo sistema di stoccaggio interrato di GPL c/o il deposito STIR di Bizerte  
Entrust your project to our team of high qualified professionals
Contact Us